MODEL

PLN-30-36

OUTPUT

DCVOLTAGE

36V

CONSTANT CURRENT REGION Note.6

25.2~36V

RATEDCURRENT

0.84A

CURRENTRANGE

0~0.84A

RATEDPOWER

30.24W

RIPPLE&NOISENOTE.2

4.5VP-P

VOLTAGE ADJ RANGE

±10%. Can be adjusted by internal potential meter SVR1

CURRENT ADJ. RANGE Note.5

3% ~  -25%. Can be adjusted by internal potential meter SVR2

VOLTAGETOLERANCENOTE.3

±10%

LINEREGULATION

±3.0%

LOADREGULATION

±10%

SETUP.RISEHOLD.TIME

1500ms, 150ms / 230VAC    3000ms, 150ms / 115VAC at full load

INPUT

VOLTAGERANGE

90~264VAC 127~370VDC

FREQUENCYRANGE

47~63HZ

EFFICIENCY

86%

VOLTAGE RANGE

PF>0.9/230VAC          PF>0.95/115VAC at full load

AC CURRENT

0.4A/115VAC     0.2A/230VAC

INRUSH CURRENT

40A/230VAC

LEAKAGECURRENT

0.5mA/240VAC

PROTECTION

OVER CURRENT

110 ~ 120%

Protection typeConstant current limiting,recovers automatically after fault condition is removed

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed.

OVER VOLTAGE

40~50V

Protection typeShut down o/p voltage,re-power on to recover.

OVER TEMPERATURE

90± 10 (TSW1)

Protection type : Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKINGTIMP

-30~+50(refer to output load derating curve)

WORKINGHUMIDITY

-20~90%Rhnon-condensing

STORAGE TEMP HUMIDITY

-40~+80 10~95%RH

TEMPCOEFFICIENT

±0.06%(0~50)

VIBRATION

10~500HZ,2G10min/1cycle period for 60 min each alongX,Y,Zaxes

SAFETY&EMC

SAFETYSTANDARDS

TUV EN61347-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved

WITHSTAND VOLTAGE

1/P-0/P:3KVAC

ISOLATIONRESISTANCE

1/P-0/P:>100M Ohms/500VDC/25/70%RH

EMI CONDUCTICN&

RADIATION

Compliance to EN55015

HARMONICCURRENT

Compliance to EN61000-3-2 Class C (>80% load), Class D (>50% load) ; EN61000-3-3

EMS IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level,  criteria A

QTHERS

MTBF

621.4Khrs min MIL-HDBK-217F(25)

DIMENSION

145*47*30mm(L*W*H)

PACKING

0.22Kg; 60pcs/14.2Kg/1.25CUFT

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Please refer to OLP characteristics.

5. Output voltage can be adjusted through the SVR1 on the PCB; limit of output constant current level can be adjusted through the SVR2 on the PCB.

6. Constant current operation region is within 70% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design.